Pink Gingiva PMMA Disc 98mm with Blood-Vessel Simulation for Temporary Dentures

SEO Title

Pink PMMA Disc 98mm | Gingiva Shade for Dental Lab Milling

SEO Description

Single-layer pink PMMA disc, 98mm, gingiva shade with blood-vessel simulation for temporary dentures. Compatible with dental CAD/CAM milling systems.

SEO Keywords

pink pmma disc, dental pmma block, 98mm pmma disc, gingiva colored pmma, temporary denture disc, cad cam pmma disc, dental lab milling disc, pink acrylic denture disc, denture base pmma, blood vein pmma disc

Product Summary

Product Description

Dental laboratories producing removable temporary dentures and gingival esthetic restorations often struggle with acrylic discs that show porosity, shade inconsistency between batches, or chipping during milling. This single-layer pink PMMA disc, 98mm in diameter, is designed specifically for denture manufacturing facilities and dental labs that need a reliable gingiva-colored material for temporary denture bases, gingival veneers and trial dentures. The pink gingiva shade includes subtle blood-vessel (capillary) simulation, giving milled gingival surfaces a natural, lifelike appearance straight out of the milling machine and reducing manual characterization time.

The disc is made of medical-grade PMMA (polymethyl methacrylate) produced under a controlled polymerization process, ensuring uniform density, low residual monomer and a homogeneous single-layer shade throughout the whole puck. No visible porosity or internal stress marks are present on the milled surface. The 98mm disc fits open CAD/CAM dental milling systems that accept 98mm pucks with standard fixtures, and works with common PMMA carbide burs. It can be processed on wet or dry milling modes according to your machine specification. Recommended supporting consumables include sharp carbide milling burs for PMMA and standard acrylic polishing paste for final high-gloss finishing.

For best milling results, use sharp burs and moderate feed rates; PMMA mills easily and produces clean chips without gumming. Typical workflows include roughing, finishing and a light polishing step to reach a high-gloss gingival surface. Thin gingival veneer walls mill cleanly without micro-cracks when burs are in good condition. Before clamping, check that the disc seat and fixture are clean and free of PMMA chips to avoid vibration marks. Avoid excessive heat buildup during dry milling by following your machine manufacturer's parameter recommendations. Always wear protective equipment and follow the milling machine's operating instructions.

Store the disc in its original sealed packaging, in a cool, dry and well-ventilated area away from direct sunlight, heat sources and UV exposure. Recommended storage temperature is room temperature; avoid humid environments that may affect surface quality over long-term storage. Keep away from organic solvents and monomer liquids. This product contains methacrylate polymers: do not use on patients with known allergy or hypersensitivity to methacrylates. It is intended for dental laboratory processing and temporary restorations only; it must not be used as a definitive long-term load-bearing permanent restoration material. Keep out of reach of non-professional users.

This 98mm pink PMMA disc is suitable for full-arch and single-unit temporary denture bases, gingival veneers, denture try-ins and occlusal rim fabrication in dental laboratories and denture manufacturing plants. It is not intended for permanent crown and bridge frameworks, implant superstructures requiring long-term load bearing, or sintering/high-temperature processes. Labs running mixed shade workflows can combine this gingiva pink disc with tooth-shade PMMA discs from the same 98mm platform for multi-part denture assemblies. For large-volume production, confirm fixture compatibility and thickness selection with your milling system before bulk ordering.

Key Features

• 98mm standard diameter, fits open CAD/CAM milling systems with 98mm puck fixtures.
• Uniform pink gingiva shade throughout the single-layer disc, no layer transition inside the puck.
• Built-in subtle capillary (blood-vessel) lines for lifelike gingival characterization.
• Medical-grade PMMA with controlled polymerization, uniform density and low residual monomer.
• Low porosity and stable machinability; produces clean chips without gumming under standard PMMA burs.
• High-density PMMA body with good impact resistance for temporary denture handling.

Benefits

• Reduces manual staining and characterization time thanks to the built-in blood-vessel gingiva effect, shortening the delivery cycle for temporary denture orders.
• Uniform density and low porosity lower the scrap rate caused by voids and chipping, cutting material waste per disc.
• Stable shade consistency between discs reduces remake and rework caused by batch color mismatch.
• Factory-direct 98mm supply keeps procurement cost low for denture plants running continuous milling production.

Applications

Dental Laboratory Fabrication

Suitable for milling temporary denture bases, gingival veneers, denture try-ins and occlusal rims on 98mm open CAD/CAM systems. Not suitable for sintering, pressing or high-temperature post-processing.

Clinical Restorative Indications

Intended for temporary restorations: temporary removable dentures, interim gingival veneers and trial dentures. Contraindicated for patients with methacrylate allergy; not for permanent long-term load-bearing restorations or implant definitive superstructures.

Commercial & Wholesale Use

Available for wholesale supply to dental distributors, denture manufacturing plants and lab material dealers. Samples for evaluation, bulk pricing and OEM/private-label packaging are supported for qualified B-end buyers.

Related Matching Products

Pairs with PMMA carbide milling burs and acrylic polishing paste for complete temporary denture workflows. For multi-part denture assemblies, combine with tooth-shade single-layer PMMA discs from the same 98mm open-system platform, plus standard denture finishing tools for gingival characterization.

Product Upgrade & Process Revision

This keeps the original stable formulation and manufacturing workflow. No product revision or process upgrade has been carried out so far.

Why Choose Us

FAQ

Q1: Which milling machines is this 98mm pink PMMA disc compatible with?

A1: It fits open CAD/CAM milling systems that accept 98mm discs with standard fixtures. Please confirm your machine's puck holder size before ordering; we can advise on compatibility.

Q2: What does "single layer with blood-vessel simulation" mean for lab work?

A2: The disc is one homogeneous pink gingiva shade containing subtle capillary lines, so milled gingival surfaces show natural characterization without extra manual staining.

Q3: How should the discs be stored before use?

A3: Keep them sealed in the original packaging, stored in a cool, dry place away from sunlight, heat and solvents, at room temperature.

Q4: Can we get samples and OEM packaging for our market?

A4: Yes. Samples are available for evaluation, and OEM/private-label packaging is supported for qualified wholesale and denture plant customers. Contact us for MOQ and lead time.

Product Attributes